中文 English
产品分类

您现在的位置:首页>产品中心  产品中心

下载:产品规格书

Product Introduction




Product Features:
It can analyze complete electronic coding and in situ rewriting with the help of a coder.

The audible alarm and flashing alarm may be freely setup. In other words, the horn/strobe may give an audible alarm

and a flashing alarm at the same time or separately, and it can also be adapted to different working environments.

The product was designed with an upper cover and a lower cover, that can be installed, debugged and maintained conveniently.

Multiple super bright red LEDs were used as lighting gadgets for visual display, ensuring a striking display, a longer service life and low power consumption.

Technical Parameters:
Operating voltage: DC24V (pulse modulation)

Operating current: quiescent current: ≤1mA (the current consumed by the bus); alarm current: ≤120mA@DC24V

Operating environment: Temperature: -10℃~+55℃; relative humidity: ≤95% (40℃, without condensation)

Flushing rate: one time/s

Audible alarm (no flashing alarms will be given)

Alarm volume: >85dB (measured at a place 3m in front of the horn/strobe)

Coding method: Electronic coding

Warning: The output mode of a horn/strobe can be selected as one of the three options in the table above only.

Wiring method: Four-wire system, non-polarity two signal buses (L1, L2) and power lines (+24V, GND)

Executive standard: GA385- 2002

 

深圳安诺基科技有限公司

深圳市宝安区前进二路

联系电话:0755-29749366 18814452893